plc controlled experimental supercritical fluid_extraction equipment

HA220-35-200 Supercritical co2 extraction equipment

Supercritical co2 extraction machine, system, for CBD oil

Industrial supercritical co2 extraction systems

Extraction kettle:Material: 0Cr18Ni9;

Volume: 120L 2 set;

Maximum working pressure:35MPa.

Separation tank:Material: 0Cr18Ni9;

Volume: 26L,20L 2sets;

Maximum working pressure: 20MPa.

CO2 extraction machine

Description:

Supercritical CO2 extraction equipment is refers to under certain pressure and temperature in the extractor the solvent and the extract contact fully then the solute spread to the solvent and then change the working conditions in the separator to dissolved substances precipitation achieve the purpose of separation.

Supercritical co2 extraction equipment
HA220-35-200 Supercritical co2 extraction equipment

Supercritical CO2 extraction systems are widely used in medicine, food, flavors, spices, such as the extraction of effective ingredients, fine separation.

Extraction kettle

Volume: 120L barrel volume: 100L pressure: 35MPa. number of 2 units;

Temperature: room temperature to 80 C, automatic control of heating temperature, measurement of CO2 fluid temperature;

Material: All stainless steel forgings of autoclave body, heated with jacket water, with external insulation and decoration.

Opening device of extraction kettle

Opening device of extraction kettle
HA220-35-200 Supercritical co2 extraction equipment Opening device of extraction kettle

The opening structure of extraction kettle is clamp type, and the quick opening device is vertical rotating structure. The clamp is opened/closed manually, and the cap is lifted/closed automatically with self-locking.

Material barrel

Volume: 100L Material: 304 stainless steel, with sieve plate on top and bottom of barrel and removable,number of 2 units;

Volume: 26L/20L Pressure: 26MPa Number 2

Temperature: room temperature to 80 C, automatic control of heating temperature, measurement of CO2 fluid temperature

Material: S30408 stainless steel, with jacket outer layer with insulation and decoration.

Length-diameter ratio not less than 6, intake pipe intubated to volume 2/3

Heating and Temperature Control System

Supercritical co2 extraction machine
HA220-35-200 Supercritical co2 extraction equipment

The heating and temperature control system for extraction kettle and separation kettle is 304 stainless steel with stainless steel pump, heating power 9KW/group, separation kettle I 12KW/group and separation kettle II 6KW/group.

Filter

Used for CO2 filtration of water and impurities.

Volume: 5L, inner barrel pressure: 16MPa material: 304 stainless steel (seamless tube)

Mixer

Used for mixing CO2 and carrier. 2L/40MPa, 304 Stainless Steel

LIQUID CO2 STORAGE TANK

Volume: 29L 2set; pressure: 10MPa material: 304 stainless steel

With water jacket and thermal insulation decoration, ensure that CO2 in the tank is liquid, with pressure gauges, safety valves, CO2 pump inlet.

CO2 pump

Supercritical co2 extraction machine
HA220-35-200 Supercritical co2 extraction equipment

Three-plunger CO2 pump with maximum pressure of 35MPa, flow rate of 1000L/H,frequency converter, regulation of CO2 flow, safety valve at pump outlet, electric contact pressure gauge, cooling pump head, power of 15KW.

Carrier Pump

Pressure: 35MPa, flow rate 20L/H, mechanical regulation 1/2-1

Refrigeration unit

Nominal refrigeration capacity 40 KW, power 15 KW, air-cooled.

Condensers and refrigerators

Condenser water tank and condensation pipe, using 304 stainless steel.

CO2 Level Meter

Magnetic flip, pressure 10MPa, stainless steel material

Flowmeter

Digital remote transmission, instantaneous flow plus cumulative flow

Safety valve

Depending on different working pressure points

High Precision Pressure Regulating Valve (Manual)

It is used for the outlet of extraction kettle and separation kettle I.

Pressure transmitter

High precision pressure transmitter is used to measure pipeline pressure.

Control Instruments

Control and measurement of temperature, pressure and flow rate.

Valve fittings and pipelines

Material: 304 stainless steel, pressure to meet the needs of the process.

CO2 Recovery Pump System

It can be used to recover the residual gas after the extraction in the extraction kettle, and the working pressure is 0.6-6 MPa. 20m3/H, power 5KW.

Supercritical co2 extraction equipment
HA220-35-200 Supercritical co2 extraction equipment

Supercritical co2 extraction equipment

Related Posts

HA220-50-10C Supercritical co2 extraction equipment

Huaan can flexibly configure one: 1L+10L (10L -100L)supercritical fluid extraction pilot system ( Equipment pictures ) , which enables feasibility study, process development, parameter amplification, and pilot production to be completed in the same u..

HA321-35-900 Supercritical co2 extraction equipment

The plant of 300L×3 is three extractors two separators SCFE device, the working medium is CO2, which can be reused. The total power of the equipment is 250KW, which covers an area of about 250 square meters and a net height of 8 meters.The extract, ..

HA220-35-300 Supercritical co2 extraction equipment

Supercritical CO2 extraction equipment is refers to under certain pressure and temperature in the extractor the solvent and the extract contact fully then the solute spread to the solvent and then change the working conditions in the separator to dis..