plc controlled experimental supercritical fluid_extraction equipment

SFE220-45-60C Supercritical co2 extraction equipment

Supercritical fluid extraction machine, system, SFE

Pilot scale supercritical co2 extraction systems

Extraction kettle:Material: 0Cr18Ni9; (Optionals: SUS 316 )

Volume: 30L 2 sets;

Maximum working pressure:45MPa.

Material Basket:Material: 0Cr18Ni9; (Optionals: SUS 316 )

Material Basket: 25L 2 sets;

Separation kettle:Material: 0Cr18Ni9;(Optionals: SUS 316 )

Volume: 17L & 13L 2sets;

Maximum working pressure: 20MPa.

Distillation column: 0Cr18Ni9;(Optionals: SUS 316 )

CO2 extraction machine

Description:

This is a medium-sized supercritical CO2 fluid extraction equipment, which has 2 extraction kettles with a capacity of 30L, and the two kettles work in turn. It is equipped with a CO2 recovery pump to help recover gas after each extraction process, thereby saving extraction costs.

60L Supercritical Fluid Extraction Equipment
HA220-45-60C Supercritical co2 extraction equipment

Extraction kettle

60L Extraction Kettle
HA220-45-60C Supercritical co2 extraction equipment extraction kettle

The volume is 30L, the design pressure is 50MPa, the maximum working pressure is 45MPa, the design temperature is 85℃, and the working temperature is 20℃-80℃. 2 The material of the cylinder is 304, and the material of the water jacket is 304.

The outlet of the extraction kettle is equipped with pressure and temperature detection points, and the pressure is manually adjusted to ensure that the pressure in the extraction kettle is always within the range of the extraction process parameters; a safety valve and an exhaust port are set at the outlet;

Separating kettle 1: volume 17L, vertical, design pressure 25MPa, maximum working pressure 20MPa, design temperature 80℃. Separating kettle 2 has a volume of 15L, a vertical type, a design pressure of 20MPa, a maximum working pressure of 18MPa, and a design temperature of 80℃.

1 The material of the cylinder is 304. The outlet of the separation kettle is equipped with pressure and temperature detection points, and the pressure is manually adjusted to ensure that the pressure in the extractor is always within the range of the extraction process parameters. A safety valve and an exhaust port are set at the outlet.

CO2 storage tank: volume 30L, design pressure 16MPa, working pressure 12MPa, design temperature 5~55℃. The barrel is made of 304 stainless steel.

Material barrel: The sealing material of the barrel is PTFE, which can be reused without swelling. The barrel is made of 304 stainless steel.

Each high-pressure vessel on the equipment undergoes professional three-dimensional software stress analysis to ensure the replacement of the equipment.

60L Extraction Kettle
60L Extraction Kettle
60L Extraction Kettle
Extraction flow chart

Supercritical co2 extraction equipment

Related Posts

HA220-40-100C Supercritical co2 extraction equipment

The 24-hour processing capacity is 600L, which is about 180 kg of materials.

HA130-50-50C Supercritical co2 extraction equipment

The 24-hour processing capacity is 400L, which is about 120 kg of materials. The disadvantage is that it runs in a single tank and does not recover CO2.