supercritical co2 extraction machine

Supercritical extraction method of tea extract

Supercritical CO2 extraction of ginger oleoresin extraction process data from ginger:

Pulverization degree: 40 mesh

Extraction pressure: 30 MPa

Extraction temperature: 45°C

Separation pressure : 20 MPa

Separation temperature:70°C

Extraction time: 10 min 5 times

Summary

Supercritical extraction method of tea extract
Supercritical extraction method of tea extract

Black tea is crushed, and the loading requires 20kg / 100L supercritical CO2; supercritical CO2 extraction technical requirements: pressure is 30MPa, extraction temperature is 45 ° C, separation temperature is 80 ° C, extraction method: static extraction 5 times, each static The extraction time was 10 min. 142 g of essence was obtained by extraction, and the extraction rate was 0.71%. Analysis by GC-MS: The product is rich in more than 60 aroma components such as alcohols, ketones, aldehydes, ethers and esters, among which dimethyl sulfide, 2-methyl-propane Aldehydes, 2-methylbutyraldehyde and dehydrolinalool have higher aroma components.

Content

Flavors and fragrances are often used in food, cosmetics, medicine, detergent and other industries. The fragrance can be divided into three types: natural fragrance, natural equivalent fragrance and artificial fragrance. At present, only a small amount of commercially available flavors are extracted from natural plants and animals, and about 84% of the products are chemically synthesized by traditional production methods in the presence of inorganic catalysts, and their use effects and safety have not been able to meet modern foods. The development needs of the flavor and fragrance industry cannot guarantee product safety. Therefore, there is an urgent need to find a method for producing natural and safe flavors and fragrances.

At present, there have been reports on the use of supercritical CO2 to extract flavors in tea, such as: Yang Jing, "Study on Supercritical Fluid Extraction of Tea Aroma Components", Food Science and Technology has disclosed a method for supercritical fluid extraction of tea aroma components. Method, the extraction rate of the tea essential oil obtained by this method reached 2.82%, but the quality of the obtained tea essential oil product (whether it contains other tea biochemical components) was not analyzed, but the aroma components in the tea essential oil were analyzed. From the analysis results, the content of aroma components is low, only about 1/3.

Another example: Ren Jian, et al. "Study on Supercritical CO2 Extraction of Fragrant Components of Maojian Tea", Cereals, Oils and Food Science and Technology, Volume 12, 2004, No. 3, discloses a method for extracting Maojian tea fragrance components by supercritical CO2. The main purpose of this method is Extract the tea essence and analyze the composition. The purity of the essence in the obtained tea essential oil is also not high. The caffeine content is as high as 33.82%. At the same time, impurities such as chlorophyll and lutein are also extracted, making the extracted essential oil darker in color. green. Because the purity and quality of the flavors obtained by the above methods are not high, it is difficult to meet the demand for high-purity natural flavors.

The green tea is crushed, and the charging requirements are Ikg / 1OOL supercritical CO2; the supercritical CO2 extraction technical requirements are: pressure is 20MPa, extraction temperature is 65 ° C, separation temperature is 70 ° C, extraction method: static extraction once, static extraction time For 60min. 4.5 g of essence was obtained by extraction, and the extraction rate was 0.45%. Analysis by GC-MS: The product is rich in more than 50 kinds of aroma components such as alcohol, ketone, aldehyde, ether and ester, among which dimethyl sulfide, 2-methyl butane Higher aldehyde and 1-pentene-3-ol aroma components.

Black tea is crushed, and the loading requires 20kg / 100L supercritical CO2; supercritical CO2 extraction technical requirements: pressure is 30MPa, extraction temperature is 45 ° C, separation temperature is 80 ° C, extraction method: static extraction 5 times, each static The extraction time was 10 min. 142 g of essence was obtained by extraction, and the extraction rate was 0.71%. Analysis by GC-MS: The product is rich in more than 60 aroma components such as alcohols, ketones, aldehydes, ethers and esters, among which dimethyl sulfide, 2-methyl-propane Aldehydes, 2-methylbutyraldehyde and dehydrolinalool have higher aroma components.

Oolong Tea 10kg, Oolong Tea Source: Purchased from the Five Stone Tea Market in Chengdu. [0041] Oolong tea is crushed, and the charging requirements are 10kg / lOOL supercritical CO2; supercritical CO2 extraction technical requirements: pressure is 50MPa, extraction temperature is 35 ° C, separation temperature is 75 ° C, extraction method: static extraction 3 times, Each static extraction time is 40min. 63 g of essence was obtained by extraction, and the extraction rate was 0.63%. By GC-MS analysis, the product was rich in more than 60 kinds of aroma components such as alcohols, ketones, aldehydes, ethers and esters. 2-methylbutanol and linalol have higher aroma components.

supercritical co2 extraction equipment

Related Posts

Supercritical CO2 extraction of chili oleoresin

Optimum experimental process parameters for supercritical extraction of chilli oleoresin:In summary, the experimental extraction pressure is 30 MPa, temperature is 315 K, time is 3.0 h, and CO2 flow is 0.40 m3 / h.

Removal of caffeine from green tea concentrate by supercritical CO2

It can be envisaged that the continuous operation of decaffeinated tea concentrate or instant tea can be realized by connecting a production-type supercritical CO 2 extraction device on the instant tea production line.

Supercritical CO2 extraction of ginger oleoresin

Fresh ginger slices are dried at 50 ° C to 13% water content, crushed to a particle size of less than 2.5mm, 1000g is placed in an extraction kettle, and CO2 with a purity of 99.5% is pressed in by a high-pressure plunger pump at a flow rate of 5m..

Tea seed oil supercritical extraction process

The extraction pressure of SFE is the main factor affecting the extraction efficiency of tea seed oil. The solubility of oil in CO2 increases with the increase of pressure, but the increase of pressure will cause a significant increase in equipment i..

Supercritical carbon dioxide fluid extraction of artepillin C from propolis

Using supercritical carbon dioxide as a solvent, combined with chromatography and adsorption technology, a large number of active components of artepillin C in propolis can be separated and purified, and the biological activity of active components o..

SFE extracts squalene from licorice

Through repeated experiments in this experiment, it was found that under the conditions of extraction pressure of 35 MPa and extraction temperature of 40 ℃, squalene was well extracted and separated