Home > Blog about supercritical fluid > Supercritical CO2 fluid extraction process and method > Supercritical CO2 fluid extraction of amber essential oil

Supercritical CO2 fluid extraction of amber essential oil

Amber

Amber is a resin fossil formed by tertiary ancient coniferous plants from 30 million to 60 million years ago, which was covered by the earth’s crust and buried deep underground, and formed through formation pressure and thermal metamorphism.

Medicine

Traditional Chinese medicine believes that amber can be used as medicine.

Experts conducted a test analysis on the curative components of amber, and believed that the curative components in amber were mainly succinic acid, rosinic acid, pine resin and essential oils.

CO2 supercritical extraction

CO2 supercritical extraction is carried out at close to room temperature, so that the high boiling point, low volatility, and easily pyrolyzed substances are extracted at a temperature far below its boiling point, which effectively prevents the succinic acid, rosinic acid, pine resin and essential oil Oxidation and dissipation, so that the effective ingredients in amber can be better maintained in the extract, and the amber products obtained are of higher quality;

CO2 supercritical extraction is the cleanest extraction method. The extract does not contain nitrates and harmful heavy metals. The whole process does not use organic solvents.

Therefore, there are no residual solvents in the extract. The product is healthy and the process is environmentally friendly, ensuring 100% Pure naturalness; CO2 supercritical extraction combines extraction and separation.

When the CO2 fluid saturated with dissolved matter enters the separator, the purpose of extraction is achieved by changing the temperature and pressure. The pressure is fixed and the temperature can also be changed.

Separate, on the contrary, the temperature is fixed, and the extract is separated by reducing the pressure, so the process is simple and easy to master, and the extraction speed is fast, the energy consumption is less, the production efficiency is improved and the cost is reduced;

CO2 is an inactive gas. There is no chemical reaction during the extraction process. It is a non-flammable gas. It is tasteless, odorless, non-toxic, and has very good safety. The CO2 gas is cheap, high in purity, easy to prepare, and in It can be reused in production, thus effectively reducing costs.

Supercritical CO2 extraction amber

Because the curative components in amber are highly viscous and easy to agglomerate, they adhere to the CO2 fluid supercritical device, which easily causes the equipment pipeline to be blocked and difficult to clean.

Supercritical CO2 fluid extraction of amber essential oil

At the same time, it is difficult to control the content of the extract and the amount of impurities, so it is used in the amber raw material Add blunt substances to crush and extract together to prevent the curative components in amber from agglomerating, improve the quality of the product, reduce equipment maintenance and reduce production costs.

CO2 supercritical extraction, the use of pressure and temperature to set the gradient change, gradient extraction, the method of collecting the curative components of amber in sections, the condition setting is simple and accurate.

Process parameters

Supercritical CO2 extraction of amber essential oil

Pulverization degree:60 mesh
Extraction pressure: 24 MPa
Extraction temperature: 45°C
Separation pressure: 6 MPa
Separation temperature: 30°C
Extraction time: 60 min