About 20L Supercritical CO2 extractor
P-10D Supercritical CO2 extraction machine is a classic pilot-level CO2 extractor, a best-selling model. Two 10L extraction vessels, design pressure 450bar, maximum working pressure 400bar; separation vessel with maximum working pressure 3L+2L constitutes a separation system, Waxes separation and Light oil separation in 1st separator, To trap lightest and volatile compounds in 2nd separator.
Each batch can process about 2600g of dry materials, and some small factories to extract lavender oil.
20L (10L×2) supercritical CO2 extraction machine configuration parameter table
|Volume||10L, 2 sets||Volume||Ⅰ 6 L, Ⅱ 4L|
|Max Working Pressure||400bar||Max. working pressure||Ⅰ 200bar, Ⅱ 180bar|
|CO2 HIGH PRESSURE PUMP||CO-SOLVENT PUMP|
|Outlet pressure||400 bar||Outlet pressure||400 bars|
|Max. flowrate||100L/h||Max. flowrate||4L/h|
|CO2 STORAGE TANK||PARAMETERS CONTROLLER/ DATALOGGING|
|Volume||10 L||Parameters control||PLC / PC-based software with recipe for automation|
|Working pressure||85 bar||Screen/Datalogging||7 inches/Included|
|Power/CO2||3 phase/Food grade ≥99.5%||HS code:||8479200000|
|Installation||7800×7000×4500mm||Airport /Port of Lading:||Shanghai|
|Max Working Pressure||500-700bar||Back pressure valve||Pneumatic control|
|Fractionating column||300par 4-section gradient temperature control||Safety protection||High pressure pump outlet distribution contact pressure gauge, set working pressure, overpressure automatic pump stop protection.|
Extraction kettle, separation kettle and high-pressure pump are respectively equipped with safety valves according to the highest working pressure, and the overpressure is automatically relieved.
Features of P-10D Supercritical CO2 Extraction Machine
- High flow rate, flow rate up to 1.45kg per minute.
- Single container capacity: 10L, number of containers: 2
- The extraction time is short, processing 60-72 pounds per day.
- The two sets of extraction kettles are designed to operate, and there is no downtime between operations.
- Carbon dioxide is continuously circulated in a closed circuit for fluid recirculation. The standard CO2 recovery system saves production costs.
- Three separators can easily separate light and heavy components.
- Low maintenance cost, piston seal can be replaced quickly
- Extraction, 5G information channel, remote work, compatible with mobile interface
- Graphic control panel, facing the future, networked production, remote control,
- Run log record export to optimize production process
- Database interface, production process customization
- Friendly man-machine interface, simple operation and setting.
What does Huaan 20L Supercritical CO2 Extraction System consist of ?
Supercritical CO2 extraction machine is suitable for material extraction (solid or liquid) under high pressure and suitable temperature. The conditions are changed in the separation kettle to resolve the dissolved materials to achieve the purpose of separation.
Huaan P-10dD supercritical CO2 Extraction System is well designed for effective oil extraction and easily operation. It is a completely configured system consists of extraction kettle(extractors), separation kettle(separators), mixer, CO2 high pressure pump, entrainer pump, refrigeration system, heat exchange system, CO2 storage tank, purification system, flow meter, temperature control system, safety protection device, etc.
About pilot scale supercritical CO2 extraction systems
In addition to the production of super-scale small test sfe equipment to provide small-scale trials and scientific research experiments, Huaan Supercritical CO2 Extraction Systems also produces pilot scale supercritical CO2 extraction systems for customers to pass laboratory data through medium-sized equipment to expand experiments and explore the best process conditions for application and industrial production.
Huaan can flexibly configure one: 1L+10L (10L -100L)supercritical fluid extraction pilot system, which enables feasibility study, process development, parameter amplification, and pilot production to be completed in the same unit without additional investment.
Lavender Oil CO2 Extraction Machine
Lavender Oil Extract
Lavender essential oil
Lavender is a perennial herb of the Lamiaceae family. It is native to the Mediterranean region and later transplanted all over the world.
Lavender was first published in Avicenna’s “Medicine”. It is used to treat chest and abdomen fullness, colds and coughs, dizziness, headache, palpitations, shortness of breath, and joint bone pain.
Lavender leaves, stems, and flowers have a strong fragrance, strong and soft fragrance, no irritation, no toxic side effects, and are widely used in medicine, makeup, washing, and food industries.
The vegetable oil extracted from lavender contains a variety of aromatic compounds and is an important natural fragrance. It is widely used in daily necessities, cosmetics, medicine and other industries. The unique fragrance of lavender essential oil and its products has many functions such as repelling insects, deodorizing, antibacterial, calming and hypnotic, and relieving mental stress.
How to extract lavender oil
Lavender has a relatively high content of essential oils. Because of its aromatic smell, it is often used as a fragrance, insect repellent and raw material for the preparation of fragrances. The extraction of lavender essential oil usually adopts steam distillation method, it can also be made into extract by solvent method, and supercritical fluid extraction method.
The yield of the steam distillation method is relatively low. The solvent method not only needs to remove the leaching solvent, but also leaves the solvent and chemical substances contained in the product.
Supercritical CO2 fluid has high density, low viscosity, and high diffusion coefficient. It can quickly extract the essential oils in lavender at near normal temperature. The process is simple and easy to operate, with high yield and no harmful chemical residues.
Lavender essential oil extraction method
Steam distillation extraction method
Weigh 80g of lavender flower spike powder, soak it for 1 hour, and place it in a 1,000 ml three-necked flask. One port is connected to a steam generator, the other is connected to a straight condenser, and the condenser is connected to an oil-water separator.
The water vapor is passed into the flask, and the time is counted from the time when the distillate drips out, the lower water is separated through the oil-water separator, the distillation is stopped after 3 hours, and the essential oils are collected. Combine the essential oils obtained from several experiments, add anhydrous Na2SO4 to remove water, weigh and calculate the yield, and refrigerate.
CO2 extraction process of lavender essential oil
The lavender flower spike powder is put into the extraction tank, the extraction pressure is 220bar, the temperature is 45℃, and CO2 is introduced at a flow rate of 20 L/h. After 120 minutes of extraction, the essential oil is released from the analysis tank. Combine the essential oils obtained from several experiments, weigh and calculate the yield, and refrigerate.
The primary and secondary relationship of factors affecting the yield of lavender essential oil extracted by supercritical CO2 is extraction time> extraction pressure> temperature> CO2 flow rate.
The optimized process conditions are extraction pressure 22MPa, temperature 45 ℃, CO2 flow rate *L/h, and time 120 min.
Industrial Lavender Essential Oil CO2 Extraction Machine
Lavender oil extraction equipment Cost and machine extraction CO2 price
Our lavender oil extraction equipment price is lower than our peers’, and our extraction equipment is high quality, we have our own manufacturing factory, all products are factory price, there is absolutely no middleman markup, we accept both small batch scale customer and large industrial batch scale wholesale customer, lavender oil CO2 extraction machines and lavender essential oil extraction machines for sale online